PH32-06 / PH32-07 / PH32-08-02 / PH32-09-02 / PH32-10-02 / PH32-12-02
Front-mounted hydraulic sweeper for loader, backhoe and other equipment

Front-mounted hydraulic sweeper for loader, backhoe and other equipment (PH32-06 / PH32-07 / PH32-08-02 / PH32-09-02 / PH32-10-02 / PH32-12-02)

Features

  • Driven from equipment hydraulic system
  • The brush is driven by dual hydraulic motors coupled directly to the core by a splined shaft
  • 32" broom, polypropylene, wire or polypropylene/wire
  • Brush width: 8', 9', 10', 12'
  • 16 gage hood covering 180 of the brush
  • Swing arm system allows the brush to follow ground variations
  • Pressure of the brush to the ground is adjustable by two springs
  • Brush is supported by two flange bearings
  • Two 18.5-6.5-8 front caster wheels
  • Anchor and lifting rings
  • Hydraulic angle change 30 right and left
  • 2 Jack stands for storage
  • Epoxy primer and urethane paint
  • 10' hydraulic hoses " with spool motor
  • Weight 8': 560 kg or 1234 lbs
  • Weight 9': 610 kg or 1342 lbs
  • Weight 10': 662 kg or 1450 lbs
  • Weight 12': 791 kg or 1740 lbs

Necessary Features on Equipment

  • Requires 32 gpm at 2000 PSI with a maximum of 50 gpm at 3000 PSI
  • " hydraulic hoses from pump to the sweeper
  • One valve to power the brush
  • One valve for the hydraulic angle
  • Male quick coupler

Options

  • 150 gallons water tank, pump, plumbing, sprayers and mounting brackets on sweeper
  • 200 gallons water tank, pump, plumbing, sprayers and mounting brackets at the rear of the equipment
  • Adjustable dust deflector to reduce airborne dust
  • Large travel spring to absorb shocks during travel
  • Female quick coupler
  • Diverter valve for hydraulic angle