RTH32-08
Features
- Rear-mounted brooms for 80 HP tractor and more
- Supply by equipment hydraulic system
- The brush is driven by one hydraulic motor coupled directly to the core by a splined shaft
- 32"Ø broom, polypropylene or polypropylene/wire
- Brush width: 8'
- 16 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Pressure of the brush to the ground is adjustable by two springs
- Brush is supported by two flange bearings
- Hopper capacity 0.8 cubic yard
- Open the hopper 90° and up 5"
- Anchor and lifting rings
- Two 18.5-8.5-8 caster wheels
- 30° right / left hydraulic angle
- 2 Jack stands for storage
- Epoxy primer and urethane paint
- 10' hydraulic hoses, ¾"Ø with spool motor
- Weight 8': 710 kg or 1560 lbs
Necessary Features on Equipment
- Requires 16 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI
- 1 remote valve to supply the brush
- 1 remote valve to angle or to open and close the hopper
- 3-point hitch, category 2
Options
- 150 gallons water tank, pump, plumbing, sprayers and mounting brackets on broom
- Adjustable dirt deflector
- Solenoid diverter valve for hydraulic angle if only 2 remote valve on the equipment
- Heavy travel spring
- Gutter broom on the tractor