RC32-09-32
Features
- Front mounted pick-up hydraulic sweeper to install on a loader
- 7 gage hood
- 32"Ø brush in polypropylene or polypropylene and steel
- Brush width: 9'
- Length : 129"
- Height : 48"
- The brush is powered by two hydraulic motors directly on the hub of the brush
- The suspension of the brush, often called the floating device, allows the brush to work in conjunction with the road oscillations
- Brush is adjustable by two springs
- Brush is supported by two ball bearings
- Sweeper functions are controlled from inside the loader
- 32" x 24" dust hopper with a capacity of 1,75 cubic yard
- Opening and closing of the hopper by two 2 ½"Ø cylinders
- Inside deflector to hold the material
- Wear device to protect the hopper
- Rubber skirt surrounding the sweeper to minimize dust projection
- Two front 18.5-8.5-8 caster wheels
- Epoxy primer and urethane paint
Hydraulic
- All hoses and couplings resist to a working pressure of 13.8 MPA
- Lifting and lowering of the sweeper by using hydraulic of your equipment
- Oil flow 35 gpm at 2000 psi, maximum 50 gpm at 3000 psi
- Sweeper functions are controlled from inside the loader by the third valve
Options
- Female quick attach
- 200 gallons water tank and support (rear), pump and sprinklers
- 24"Ø gutter brush manual activator and flow control
- Deviator
- Control for hopper opening and orientation
- Right/left and front/rear system which eliminate sweeper overloading
- 40 gallons flow control and check valve
- 64 gallons flow control and check valve
- Hydraulic orientation: 30°
- Way out device when the sweeper is working at a 30° angle