RC32-07-18 / RC32-08-18
Features
- Front mounted pick-up hydraulic sweeper to install on a backhoe
- 11 gage hood
- 32"Ø brush in polypropylene or polypropylene and steel
- Brush width: 7' or 8'
- The brush is powered by two hydraulic motors directly on the hub of the brush
- The suspension of the brush, often called the floating device, allows the brush to work in conjunction with the road oscillations
- Brush is adjustable by two springs
- Brush is supported by two ball bearings
- 84" length, 18" width, 24" height dust hopper capacity: 0.75 cubic yard
- 96" length, 18" width, 24" height dust hopper capacity: 0.85 cubic yard
- Opening and closing of the hopper by two 2"Ø cylinders
- Inside deflector to hold the material
- Wear device to protect the hopper
- Rubber skirt surrounding the sweeper to minimize dust projection
- Hydraulic system needed : 35 gpm and three double action oil exits
- Two front 18.5-8.5-8 caster wheels
- Epoxy primer and urethane paint
Hydraulic
- All hoses and couplings resist to a working pressure of 13.8 MPA
- Lifting and lowering of the sweeper by using hydraulic of your equipment
- Oil flow 35 gpm at 2000 psi, maximum 50 gpm at 3000 psi
- Sweeper functions are controlled from inside the loader by third valve
Options
- Female quick attach
- 200 gallons water tank and support, pump and sprinklers (rear)
- 24"Ø gutter brush, manual selector and flow control
- Right/left and front/rear system which eliminate sweeper overloading
- Control for hopper orientation and opening
- Deviator
- Flow control and ball valve for 40 gls. and more
- Hydraulic orientation: 30° on each side
- Way out device when the sweeper is working at a 30° angle