TH32-10-02
Features
- Rear mounted hydraulic sweeper to install on a 80 hp tractor
- 16 gage hood which cover 180° of the brush
- 32"Ø brush in polypropylene or polypropylene and steel
- Brush width: 10'
- The brush is powered by two hydraulic motors directly on the hub of the brush
- The suspension of the brush, often called the floating device, allows the brush to work in conjunction with the road oscillations
- Brush is adjustable by two springs
- Brush is supported by two ball bearings
- Anchor and lifting ring
- Hydraulic orientation : 30° each side
- Jack stands
- Oil flow 24 gpm at 2000 psi, maximum 50 gpm at 3000 psi
- Two front caster wheels (18.5-6.5-8)
- Epoxy primer and urethane paint
- Hydraulic hoses ¾"Ø x 10' with spool motor
- Approximate weight 10': 600 kg (1320 lbs)
Accessories for tractor
- Two double action auxiliary oil exits
- Install on three points cat.2 (32", 1 1/8"Ø pin)
Options
- 0.6 cubic yards dust hopper capacity
- 100 gallons water tank and support, pump and sprinklers
- Dust deflector with a sliding adjustment
- Fast travel spring