Rear-mounted sweeper for 40hp tractor and other small equipments
TH24-05 / TH24-06 / TH24-07
Features
- Driven from equipment hydraulic system
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
- 24"Ø broom, polypropylene, wire or polypropylene/wire
- Brush width: 5', 6' or 7'
- 16 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Pressure of the brush to the ground is adjustable by two springs
- Brush is supported by two flange bearings
- Anchor and lifting rings
- Manual angle change 30° right and left
- 2 Jack stands for storage
- Epoxy primer and urethane paint
- 8' hydraulic hoses ¾"Ø with spool motor
- Weight 5': 281 kg or 618 lbs
- Weight 6': 305 kg or 671 lbs
- Weight 7': 345 kg or 761 lbs
Necessary Features on Equipment
- Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI
- 1 remote valve to power the brush
- 3-point hitch, category 1
Options
- 50 gallons water tank, pump, plumbing, sprayers and mounting brackets on sweeper
- Adjustable dust deflector to reduce airborne dust
- Angle cylinder
- Solenoid diverter valve for angle if only 1 remote valve
- Two 10" diameter front caster wheels
- Two 16.5-6.5-8 front caster wheels (7' wide only)
- Fast travel spring