PH32-07CA / PH32-08CA
Features
- Sweepers for truck
- Driven from equipment hydraulic system
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
- 32"Ø broom, polypropylene, wire or polypropylene/wire
- Brush width: 7', 8'
- 16 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Pressure of the brush to the ground is adjustable by two springs
- Brush is supported by two flange bearings
- Two 18.5-6.5-8 front caster wheels
- Anchor and lifting rings
- Hydraulic angle change 30° right and left
- 2 Jack stands for storage
- Epoxy primer and urethane paint
- 10' hydraulic hoses ¾"Ø with spool motor
- Weight 7': 495 kg or 1120 lbs
- Weight 8': 548 kg or 1208 lbs
Necessary Features on Equipment
- Truck must be equipped with a 20gpm pump
- 25 gallons hydraulic tank and filtering system
- ¾"Ø hydraulic hoses from pump to the sweeper
- Lifting and lowering cylinder
- One double action oil exit for hydraulic angle
- One double action oil exit for the brush
- Male quick coupler
Options
- 200, 300 or 500 gallons water tank, pump, plumbing, sprayers and mounting brackets in the truck box
- Adjustable dust deflector to reduce airborne dust
- Large travel spring to absorb shocks during travel
- Female quick coupler
- Diverter valve for hydraulic angle