PH24-07
Features
- Sweepers for light-duty pick-up truck
- Driven from pick-up truck hydraulic system
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
- 24"Ø broom, polypropylene, wire or polypropylene/wire
- Brush width: 7'
- 16 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Pressure of the brush to the ground is adjustable by two springs
- Brush is supported by two flange bearings
- Anchor and lifting rings
- Hydraulic angle change 30° right and left
- 2 Jack stands for storage
- Epoxy primer and urethane paint
- 10' hydraulic hoses ¾"Ø with spool motor
- Weight 7': 340 kg or 750 lbs
Necessary Features on Equipment
- Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI
- ¾"Ø hydraulic hoses from pump to the sweeper
- Lifting and lowering cylinder
- One double action oil exit for hydraulic angle
- One oil exit for the brush
- 30 gallons hydraulic tank and filtering system
- Male quick coupler
Options
- 200 or 300 gallons water tank, pump, plumbing, sprayers and mounting box
- Adjustable dust deflector to reduce airborne dust
- Small travel spring to absorb shocks during travel
- Female quick attach
- Hydraulic unit including, hydraulic pump, oil tank, hydraulic filter, hydraulic control