RLH24-06
Features
- Pick-up brooms for forklift
- Supply by equipment hydraulic system
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
- 24"Ø broom, polypropylene, wire or polypropylene/wire
- Brush width: 6'
- 14 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Brush is supported by two flange bearings
- Two 10" diameter front caster wheels and 1 10" diameter rear caster wheels
- Anchor and lifting rings
- Manual opening of the hopper
- Hopper capacity: 6 cubic feet
- Epoxy primer and urethane paint
- 10' hydraulic hoses ¾"Ø with spool motor
- Weight: 480 kg or 1150 lbs
Necessary Features on Equipment
- Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI
- ¾"Ø hydraulic hoses from pump to the broom
- One auxiliary oil exit (side shift) to supply the brush.
- Minimum width between forks: 24"
- Maximum width between forks: 38"
- Maximum forklift width: 6"
Options
- 50 gallons water tank, pump, plumbing, sprayers and mounting brackets on broom
- Gutter broom, manual selector and flow control