PHL24-06 / PHL24-07
Features
- Brooms for forklift
- Supply by equipment hydraulic system
- The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft
- 24"Ø broom, polypropylene, wire or polypropylene/wire
- Brush width: 6', 7'
- 16 gage hood covering 180° of the brush
- Swing arm system allows the brush to follow ground variations
- Pressure of the brush to the ground is adjustable by two springs
- Brush is supported by two flange bearings
- Two front and 1 rear 16.5-6.5-8 caster wheels
- Anchor and lifting rings
- 30° right / left manual angle
- Epoxy primer and urethane paint
- 10' hydraulic hoses ¾"Ø with spool motor
- Weight 6': 528 kg or 1160 lbs
- Weight 7': 548 kg or 1200 lbs
Necessary Features on Equipment
- Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI
- ¾"Ø hydraulic hoses from pump to the broom
- One auxiliary oil exit (side shift) to supply the brush.
- Minimum width between forks: 24"
- Maximum width between forks: 43"
- Maximum fork lift width: 8"
Options
- 50 gallons water tank, pump, plumbing, sprayers and mounting brackets on the broom
- Adjustable dirt deflector